Skip to content

2-year workmanship warranty. Free consultation

(843) 919-4905
(843) 919-4905

ServicesGutter Covers

Gutter Covers in Meggett

A gutter cover puts a solid hood over your gutters. Rain follows the curve and drops in, and leaves and needles slide off. We check that your gutters can carry a cover, fit it to your roofline and tell you plainly if it's the wrong pick.

Worker on an aluminum stepladder fitting a curved white cover over a gutter beneath dark asphalt shingles on a brick house, with a white downspout at the corner

How covers work and which homes they suit

Think of a cover as a curved metal lid laid over the top of your gutter. Rain hugs that curve and slips into a thin opening along the front. Leaves and needles keep going and land in the yard. Gutter guards work another way. They're mesh or screens that sit down in the opening.

Covers earn their keep on homes under big trees that shed small debris. Pine needles, oak tassels and seed pods tend to push right through a screen. They don't suit gutters that sag, drip at the joints or hold water. A cover over a bad gutter only hides the trouble. When we see that, we'll tell you, and we'll talk about gutter repair before anything else.

We treat your home like it belongs to the neighbor across the street. You get a straight answer, no push, and a yard as clean as we found it.

What the job includes

A look at the gutters first

Before any cover goes on, we check hangers, seams and pitch. A cover locks the gutter into its current shape, so the gutter under it needs to be sound and sloped right.

Covers sized to your gutters

We match the cover to your gutter width and profile, most often 5-inch or 6-inch K-style. A loose fit leaves a gap at the back where debris slips in.

Secure fastening at the roof edge

Depending on your roof, the back edge slides under the first course of shingles or fastens to the fascia. We lift shingles carefully so the seal strips aren't torn. The front edge screws to the gutter lip so storm wind can't peel the cover up.

Clean corners and ends

Corners are where rushed installs fail. We cut and fit each miter so the cover runs unbroken around the house, with no open seams for needles to collect in.

Cleanup before we leave

We pick up cut-offs, screws and scraps, and we run a magnet over beds, drives and lawn so nothing ends up in a tire or a bare foot.

Installer on an aluminum ladder pointing to a rusted gutter seam on a brick ranch house while the homeowner watches from below

Signs gutter covers are worth a look

You're on a ladder every few months
If your gutters fill up again soon after they're cleared, the trees are winning. A cover keeps most of that out for good.
Needles get through your screens
Pine needles poke through mesh and stand up like a brush, trapping more debris behind them. A solid cover gives them nothing to snag on.
Water spills over the front
Packed debris backs water up and over the edge, staining siding and washing out beds. If the overflow comes from bad pitch instead, we fix the pitch first.
Plants or mosquitoes in the gutters
Wet leaf mats grow weeds and hold the standing water mosquitoes love in a long, humid summer. Keeping debris out keeps the gutter draining.
You'd rather not climb at all
For a lot of folks, the ladder is the real problem. Covers cut down how often anyone has to go up there.

How a gutter cover job runs

  1. 1

    A free consultation by phone

    You tell us about your home and what's growing around it. We answer what we can on the call and pick a time to come by.

  2. 2

    We look over the roofline

    We walk around the house and check the gutters, roof pitch and shingles. If a hanger is loose or a board is soft, we take a picture so you can see it too. Then we put the estimate in writing, broken out item by item, along with our honest read on whether covers are worth it for your home.

  3. 3

    Install day

    Most houses take about a day. Ladders go on pads to spare your beds and grass. We check each run for slope, then fit and fasten the covers one section at a time.

  4. 4

    Testing and a final look together

    Before we pack up, we send water down the roof with a garden hose and you watch it fall into the gutter. Then we go around the house with you and answer anything you want to ask.

What sets the price of covers

Every roof is different, so we won't toss out a number before we've seen yours. Once we've looked, you get a written estimate, and that's the figure we hold to. Here's what pushes it up or down.

How many feet of gutter
Covers are sold and fitted by the foot. More roofline means more material and more hours on the ladder.
Height and roof pitch
A two-story house or a steep roof needs more setup and slower, careful work than a one-story ranch.
Shape the gutters are in
Covers can't go on gutters that sag or drip at the joints, so those get fixed first. That repair shows up as a separate line on your estimate, so nothing is hidden.
Cover style and metal
Thicker aluminum costs more than light stock. It also stays straight under falling limbs and long hot afternoons.
Corners and rooflines
Dormers, valleys and a lot of inside corners take extra cuts and fitting time compared with one long straight run.

Gutter cover questions

How are covers different from gutter guards?
Covers are solid. Debris rolls over the top and water curls down into a slot at the front. Guards are mesh or screens set in the gutter opening, and water drops through the holes. Covers do better with pine needles and fine stuff, while guards take in more water in a heavy storm. We'll tell you which one suits your trees and roof.
Do gutter covers need any upkeep?
A little. Pollen and grit can build up along the front lip, and a few leaves may rest on top after a windy storm. Checking them once or twice a year is usually plenty.
Will heavy rain shoot right past the cover?
During a real downpour, a bit of water can jump the slot, mostly below roof valleys where it moves fast. Getting the angle right cuts that way down. If part of your roof looks like a problem spot, we'll show you before you decide anything.
Can covers go on the gutters I already have?
Most of the time, as long as they're solid and pitched correctly. Bent, rusted or loose gutters won't be fixed by a cover. We'll show you what we see and talk through gutter repair or new gutter installation.
Will covers hurt my roof?
Not if they're installed carefully. We raise shingles gently and never nail through them. If your shingles carry a warranty, read what it says about gutter add-ons, and we're glad to go over that paperwork with you.
Brown seamless gutter and downspout with offset elbows on a tan stucco home, draining onto a splash block in river-rock landscaping beside a covered patio

Talk it over before you decide

Tell us about your trees and your gutters, and we'll come take a look. If covers aren't the right fit, you'll hear that from us.